The error doesn’t always mean the pad is physically full. Canon sets a conservative counter. However, if you’ve printed thousands of pages, the pad may actually be saturated. ⚠️ Warning: Resetting the counter without cleaning or replacing the physical ink absorber can lead to ink leaking inside your printer, potentially damaging it permanently. What is a Canon G2010 Resetter? A resetter is a small software tool (usually for Windows) that resets the printer’s internal waste ink counter back to zero. It does not physically clean or replace the ink pads — it only tells the printer that the counter is empty again.
In this complete post, I’ll explain what this error means, why you need a resetter, where to find a safe one, and how to use it step-by-step. Your Canon G2010 has an internal sponge (the waste ink absorber) that collects ink purged during print head cleaning. The printer tracks how much ink it has dumped. Once it reaches a preset limit, the printer locks itself down to prevent overflow. canon g2010 resetter
Reset once to finish urgent prints, then plan to install an external waste ink tank or replace the pads within a month. Have you successfully reset your Canon G2010? Share your experience or ask questions in the comments below! The error doesn’t always mean the pad is physically full
| If your printer... | Action | |-------------------|--------| | Is < 2 years old, light use | Reset only – pad is likely fine. | | Is > 2 years old, heavy use | Open printer and replace/clean absorber pads (or install an external waste ink tank). | | Leaks ink after reset | Immediately stop using, clean internal pads, or take to a repair shop. | ⚠️ Warning: Resetting the counter without cleaning or
After resetting, your printer will work normally, but you should eventually service the absorber. This is the trickiest part. Many resetter downloads online contain malware, viruses, or are simply fake.
A: Typically 2–3 times before the physical pad must be replaced. After that, ink will leak. Final Verdict The Canon G2010 resetter is a lifesaver for getting your printer working again after a false “ink absorber full” error. Use it carefully, always scan the tool for viruses, and don’t ignore the physical maintenance.